Create a Ning Network!

The premier site for owners of the famous 233.

roberto alvarez's Discussions (22)

View

Discussions Replied To (17)	Replies	Latest Activity
"I ask to formula, but are diferent company´s, formula is not thunderbird as i can re…" roberto alvarez replied Jul 17, 2010 to Vin #	3	Jul 18, 2010 Reply by GEORGE CATEGE
"3970020 is the casting or number on the engine block" roberto alvarez replied Jul 6, 2010 to performanc question	5	Jul 6, 2010 Reply by roberto alvarez
"Hi David, now i see a new deatail, reading a copy of the omc 225 manual for the 1977…" roberto alvarez replied Jul 6, 2010 to performanc question	5	Jul 6, 2010 Reply by roberto alvarez
"Hi, the prop is a 14X18 and the rpm at 24 knots is 3500, before i was using a 14X14…" roberto alvarez replied Jul 5, 2010 to performanc question	5	Jul 6, 2010 Reply by roberto alvarez
"YES,Now i am ready for a 600 mile off shore trip around Baja California Coast, if i…" roberto alvarez replied Jul 16, 2009 to were must be located the longitudinal center of balance??	8	Jul 16, 2009 Reply by roberto alvarez
"PROBLEM SOLVED DAVID, I REPLACE THE PROP, IT WAS A 13x16 AND THIS ENGINE MUST USE A…" roberto alvarez replied Jul 16, 2009 to were must be located the longitudinal center of balance??	8	Jul 16, 2009 Reply by roberto alvarez
"Some people left the fuel tank full to prevent water condensation , if they use any…" roberto alvarez replied Jul 16, 2009 to Proud new owner	3	Jul 16, 2009 Reply by Brian Meineche
"LCG is what i need to know for a Prismatic Planing Hull i found the formula now need…" roberto alvarez replied Jul 1, 2009 to were must be located the longitudinal center of balance??	8	Jul 16, 2009 Reply by roberto alvarez
"Last night i open the formula vintage boats section and based on the instruments pan…" roberto alvarez replied Jun 29, 2009 to were must be located the longitudinal center of balance??	8	Jul 16, 2009 Reply by roberto alvarez
"Hi David, it have the omc stinger drive unit and no trim as in another drives can be…" roberto alvarez replied Jun 28, 2009 to were must be located the longitudinal center of balance??	8	Jul 16, 2009 Reply by roberto alvarez

‹ Previous
1
2
Next ›

Welcome to
Formula 233 Registry

Sign Up
or Sign In

Badge

Loading…

© 2024 Created by David. Powered by

Badges | Report an Issue | Terms of Service

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Hello, you need to enable JavaScript to use Formula 233 Registry.

Please check your browser settings or contact your system administrator.

Sign in to chat!