Formula 233 Registry

The premier site for owners of the famous 233.

Well I finally did it... Hung a Suzuki 300 on the back with an Armstrong bracket.  I completed the project this past spring and I couldn't be happier with the results.  The boat performs remarkably well.

Views: 388

Attachments:

Reply to This

Replies to This Discussion

What sort of performance are you getting? How much did the bracket set you back? Was you boat a center console originally or a conversion? I just bought a 1977 hard top that I'm planning to build a fishing rig out of. I'm eyeing up the Suzuki DF350A. 

The boat does about 52 mph in flat water with little weight.  I haven't checked fuel consumption except using the Suzuki fuel flow gauge.  I usually cruise around 25 to 27 mph burning about 7 to 8 gph.  Bottom line is, I'm thoroughly pleased with the results and I really don't care much about fuel consumption.  It's a lot better than the 233 sterndrive I had before all the way around.  The bracket was about $2,800.00.  I went with the full width platform and ran it past the bump outs on the transom.  I sent Armstrong a template for them to fab the bump outs, but I still had to do some minor cutting and grinding to get it to fit properly.  I'm very pleased with the bracket and the Suzuki 300.  As far as I'm concerned, it's a perfect match.  Too much speed and the 233 begins to chine walk.

My boat was originally a cuddy cabin.  I did the center console conversion back in 2004.  I've had my boat since 1984 and did a complete hull up restoration after running the boat for less than a year.  I put in new foam stringers and sole (no wood).  I've had this boat for a long time and there's not another boat out there I'd rather have, new or old.  I do all my own fiberglass work.  It's easy once you get the hang of it.  My day job has me in front of a computer so I enjoy the shop work.

Nice Job

.

whilst were on the subject of outboard conversions

has anybody ever seen or done an outboard conversion on a 233 with original transom location in a dovetail-swallow tail transom arrangement??

understanding its a fair bit of structural re-shaping and you loose a couple of feet of deck space

I have never seen this done to the inside of the transom, but I have seen it done in several projects to the exterior of the transom to lengthen the boat.

RSS

Badge

Loading…

© 2020   Created by David.   Powered by

Badges  |  Report an Issue  |  Terms of Service