The premier site for owners of the famous 233.
fitting of pods?
hi guys im currently restoring a 233 removing the old 351 and leg and wishing to attach a pod and twin 4 strokes. any advice and if there is any where i can purchase a pod would be great.
Views: 212
Replies to This Discussion
-
Permalink Reply by Henry Todd on
-
Are you referring to an "Outboard Engine Bracket?" If so, there are several manufacturers who manufacture outboard engine brackets. First you need to decide what fits your needs. Are you searching for an aluminum bracket or a fiberglass bracket? Would you like one custom built or more "Mass produced?" For an aluminum bracket, you could check companies such as "Stainless Marine," "Gil Marine," etc.... For a fiberglass bracket, I would check with "Hermco."
I do not have any "Personal" experience with these above listed companies; I am just trying to think of who makes what.....
Good luck and let us know if we can help you out!
Henry
-
Permalink Reply by ian ziebell on
-
cheers henry, i was thinking of a fiberglass pod that i could bolt onto the transom, ive removed the old inboard motor and leg, im thinking of a twin rig with either 2x 200 4 strokes or 2x 225 4 strokes. so the pod needs to be able to suppor the weight and also help with some flotation. ive been looking at alans for is eden crafts he is making with the formula hulls and hope he will sell me one so i can fit it and then start te next stage of the build. its going to be a big project and a little time consuming but she will be worth it... cheers for the info
-
-
Good morning to you Mr. Ziebell!
It sounds like you have put quite a bit of thought into your boat too! Of course there are personal opinions about which type of bracket is better and why, but I agree with you. I too will be utilizing a fiberglass bracket but it will be a little bit different than what is typically seen. You and I are contemplating the same type/size of power as well so it will be interesting to see how our two brackets turn out. My project will also take some time as I am still in the demolition stage (Along with juggling the responsibilities of work, owning a new house, a second project vessel and several cars to maintain!).
As I plan on keeping this boat for the duration of my existence on this planet, I am going to build it as stout as possible. I am taking my Formula down to the bare hull including replacing all of the stringers, bulkheads, floor, transom, etc. I want it to last!
Keep in touch and let the rest of us know how your progressing with your project!
Stay safe!
Henry
© 2024 Created by David.
Powered by
